Walk through any brick market in Haryana and you will find two kinds of red brick side by side. One is the ordinary table-moulded brick from a local bhatta. The other is the wire cut brick: flatter, squarer and a little dearer. Both are fired clay. What separates them is how the clay is shaped before it goes into the kiln.
How a wire cut brick is made
Stiff clay is pushed through a steel die by an extruder, the way a tube of toothpaste gives a ribbon. The ribbon comes out as one long column with the exact width and height of the brick. A frame of taut wires then slices the column into bricks. The cores, if there are any, are formed by pins inside the die, which is why a 3 hole or 8 hole brick has such clean round holes.
An ordinary brick is made by throwing a lump of wet clay into a wooden or steel mould, by hand or on a table. Each brick is a little different in height, the edges are softer and there is usually a frog on one face.
What you notice in the wall
Joints
Because the height is steady, a mason can keep the bed joint close to 10 mm all the way up. With moulded bricks the joint often swings between 8 and 20 mm to make up for uneven bricks. Thinner, even joints use less mortar and look neater if the wall is left exposed.
Plaster
A wall of wire cut bricks is flatter, so if you plaster it you need less material to bring it true. If you leave it exposed, there is nothing to hide.
Speed
Masons tend to lay regular bricks faster because they spend less time adjusting each one. How much faster depends on the mason and the wall, so treat it as a small bonus and do not budget on it.
When ordinary bricks still make sense
For a wall that will be plastered on both sides and never seen, a well-fired ordinary brick does the structural job. Many builders use wire cut bricks only for the visible parts (the front, the boundary, the gate pillars) and ordinary bricks behind plaster.
Counting bricks for either type
The count depends on the face size of the brick plus one joint. Our 229 × 110 × 70 mm wire cut brick needs about 52 bricks per m² in a 4.5 inch wall and about 104 per m² in a 9 inch wall. Use the wire cut brick estimator to work out your own wall, then send the number to us on WhatsApp for a delivered rate.